1421 Printed Circuit Board Standoffs 1421PCB Series

1/4" Standoffs

• 0.65” (17mm) overall height
• 0.71” (18mm) square mounting pad with self adhesive
• P.C. board bottom would rest 0.25” (6mm) above the enclosure floor
• Suggested material thickness 0.0625” (1.6mm) max.
• Suggested hole diameter 0.156” (4mm)
• Tough white nylon

1/2" Standoffs

• 0.9” (23mm) overall height
• 0.71” (18mm) square mounting pad with self adhesive
• P.C. board bottom would rest 0.5” (12.7mm) above the enclosure floor
• Suggested material thickness 0.0625” (1.6mm) max.
• Suggested hole diameter 0.156” (4mm)
• Tough white nylon