The FSU1000 incorporates an onboard adjustable flash rate of 10 to 100 flashes per minute and a universal input voltage in one device.  Its circuitry is encapsulated and is capable of controlling loads of up to 20 A.  The versatility of the FSU1000 makes it ideal for applications where various flash rates and operating voltages are required.

 

 

The FS100 Series may be used to control inductive, incandescent or resistive loads.  This series offers a 1 A (fullwave) or a 2 A (halfwave) steady state, 10 A inrush solid state output; and may be ordered with an input voltage of 24 or 120 V AC.  The FS100 Series offers a factory fixed flash rate of 75 flashes per minute or may be ordered with a fixed custom flash rate ranging from 45 to 150 flashes per minute.  Ideal for OEM applications where cost is a factor.

 

 

The FS100 Series may be used to control inductive, incandescent, or resistive loads.  Input voltages of 24, 120, or 230 V AC are available.  Factory fixed flash rate of 90 flashes per minute or may be ordered with a fixed custom flash rate ranging from 10 to 300 flashes per minute.  Encapsulation provides protection against shock, vibration, and humidity.  This group of solid state flashers has proven reliability with years of use throughout the world.

 

 

 

The FS200 Series may be used to control inductive, incandescent, or resistive loads.  Input voltages of 12, 24, 36, 48, or 110 V DC are available.  Factory fixed flash rate of 90 flashes per minute or may be ordered with a fixed custom flash rate ranging from 10 to 180 flashes per minute.  Encapsulation provides protection against shock, vibration, and humidity.  Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications.

 

 

 

The FS300 Series of solid state flashers were specifically designed to operate lamp loads.  Their two-terminal series connection feature makes installation easy.  The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications.  All solid state construction means reliability and long life. 

 

 

 

 

 

The FS400 Series is a low leakage AC flasher designed to control LED, or resistive loads.  This series offers a solid state output and may be ordered with an input voltage of 24 V to 240 V AC, in two ranges.  It offers a factory fixed flash rate of 75 flashes per minute or may be ordered with a fixed custom flash rate ranging from 45 to 150 flashes per minute.  The FS400 is the perfect solution for LED lamp flashing.

 

 

The AF Series offers a high inrush capacity of up to 200 A.  These devices exceed mechanical type relays in both performance and lifespan.  The AF Series is constructed with no moving parts to arc, wear, and eventually fail; 100 million operations are typical.  Circuitry is encapsulated to provide protection against vibration and moisture, making the AF Series ideal for outdoor applications.

 

 

The FS500 Series flash rate is adjustable from 10 to 100 flashes per minute.  A locknut is provided to hold selected flash rate.  The long-life electronic circuit combined with a quality electromechanical relay provides flexibility and reliability in most applications.

 

 

The SC3 / SC4 Series are solid state 3 or 4 channel chasers designed for sequential three or four circuit flashing of incandescent lamp loads.  Unlike electromechanical chasers, there are no contacts to arc, wear, and eventually fail.  Fixed or adjustable rates of 30 to 300 operations per minute.