Call Our Experts:
1-512-973-3500
You are here: Home > Relays > Voltage Monitors / Phase Monitors > 3 Phase Voltage Monitors by SSAC / Symcom
We found 103 results matching your criteria.
3 Phase Voltage Monitor
WVM Series
Motor Protector
The WVM Series provides protection against premature equipment (motor) failure caused by voltage faults on the 3 Phase Line. The WVM’s microcontroller design provides reliable protection even if regenerated voltages are present. It combines dependable fault sensing with a 10 fault memory and a 6 LED status display. Part instrument, part control, the WVM protects your equipment when you’re not there and displays what happened when you return. The WVM is fully adjustable and includes time delays to prevent nuisance tripping and improve system operation. Time delays include a 0.25 to 30 s adjustable trip delay, an adjustable 0.25 to 64 m (in 3 ranges) restart delay, plus a unique 3 to 15 s true random start delay. The random start delay prevents voltage sags caused by simultaneous restarting of numerous motor loads after a power outage.
  • Protects Against:
    • Phase Loss & Reversal
    • Over, Under & Unbalanced Voltages
    • Short Cycling
  • 10 Fault Memory & Status Displayed on 6 LED Readout
  • Switch Selectable Automatic Restart, Delayed Automatic Restart, & Manual Reset
  • Isolated 10 A SPDT Relay Contacts
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
Universal 3 Phase Voltage Monitor
DLMU & DLMH Series (SPDT & N.O. or N.C.)
Motor Protector
The DLMU Series is a universal voltage, 3 Phase Voltage Monitor. It continuously measures the voltage of each of
the three phases with microcontroller accuracy and compares the value to preset trip points. It separately senses
Phase Reversal, Over, Under and Unbalanced voltages including Phase Loss and over or under frequency. Protection
is assured during periods of large average voltage fluctuations or when regenerated voltages are present. The unit
trips within 200 ms when phase loss is detected. Adjustable time delays are included to prevent nuisance tripping
and short cycling of sensitive equipment. The 10A isolated SPDT and 2A alarm output relay contacts trip when a
phase voltage exceeds the trip limits for the trip delay. Nominal line voltage, voltage unbalance, and time delays
are knob adjustable. The phase loss set point and the acceptable frequency range are fixed. Both Delta and Wye
systems can be monitored; no connection to neutral is required.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Over, Under and Unbalanced Voltages
    • Over / Under Frequency
  • 35 mm DIN Rail or Surface Mounting
  • SPDT Isolated 10A Relay Contact
  • N.O. or N.C. SPST Isolated 2A Relay Contact
  • LED Indicates: Relay, Faults, & Time Delays
  • Universal Line Voltage 240 - 480 V AC in One Unit
  • 600 V AC Version Available
  • 3 Wire Connection for Delta or Wye Systems
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
Universal 3 Phase Voltage Monitor
HLMU Series (DPDT)
Motor Protector
The HLMU Series is a universal voltage, encapsulated, 3 Phase Voltage Monitor. It continuously measures the voltage of each of the three phases with microcontroller accuracy and compares the value to preset trip points. It separately senses Phase Reversal, Over, Under and Unbalanced voltages including Phase Loss and over or under frequency. Protection is assured during periods of large average voltage fluctuations, or when regenerated voltages are present. The unit trips within 200 ms when phase loss is detected. Adjustable time delays are included to prevent nuisance tripping and short cycling of sensitive equipment. The 10A isolated DPDT output relay contacts trip when a phase voltage exceeds the trip limits for the trip delay. Nominal line voltage, voltage unbalance, and time delays are knob adjustable. The phase loss set point and the acceptable frequency range are fixed. Both Delta and Wye systems can be monitored; no connection to neutral is required.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Over, Under & Unbalanced Voltages
    • Over / Under Frequency
  • Encapsulated Circuitry
  • DPDT Isolated 10 A Contacts
  • LED Indicates Relay Status, Faults, & Time Delays
  • Universal Line Voltage 200 - 480 V AC in One Unit
  • Compact, Encapsulated Design
  • Finger-Safe Terminal Blocks, up to 12 AWG
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
3 Phase Voltage Monitor
PLMU Series
Universal Plug-in Monitor
The PLMU Series continuously measures the voltage of each of the three phases to provide protection for three phase motors and sensitive loads. Its microcontroller senses under and over voltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. Universal voltage operation and standard base connection allows the PLMU to replace hundreds of competitive part numbers.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Overvoltage
    • Undervoltage
    • Underbalanced Voltages
  • Octal Plug-in with SPDT Isolated 10 A Contacts
  • Operates from 200 - 480 V AC
  • LED Indicator Glows Green when Voltages are Acceptable, Red for Faults
  • Easier to Install - Indicates Reverse Phase Wiring
  • Simple 3-Wire Connection for Delta or Wye Systems
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
3 Phase Voltage Monitor
PLM Series
Motor Protector
The PLM Series continuously measures the voltage of each of the three phases. The PLM Series uses a new microcontroller circuit design that senses Undervoltage, Voltage Unbalance, Phase Loss, and Phase Reversal. Protection is assured when regenerated voltages are present. Both Delta and Wye systems can be monitored; no connection to neutral is required.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Undervoltage
    • Unbalanced Voltages
  • 8 Pin Plug-in Base
  • Adjustable Low Voltage Trip Point
  • Factory Fixed Unbalance and Trip Delay
  • Line Voltages 200 - 480 V AC, in 3 Ranges
  • SPDT Isolated 10 A Relay Contacts
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
Compact 3 Phase Voltage Monitor
TVW Series The NetTM
Motor Protector
Provides protection for motors and other sensitive loads. Continuously measures the voltage of each of the three phases using a new microcontroller circuit design that senses under and overvoltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. Includes a trip delay to prevent nuisance tripping and a restart delay to prevent short cycling after a momentary power outage.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Undervoltage
    • Overvoltage
    • Unbalanced Voltages
    • Short Cycling
  • Fixed Trip Points and Delays
  • Adjustable Voltages from 208 - 480 V AC in 4 Ranges
  • Monitor 600 V AC Lines by Connecting VRM Accessory
  • Isolated 10 A, SPDT Relay Contacts
  • Bi-color LED indicator Shows:
    • Output Status
    • Faults
    • Time Delays
    • Phase Reversal
    • Set Point
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
Compact 3 Phase Voltage Monitor
TVM Series The NetTM
Motor Protector
Provides protection for motors and other sensitive loads. Continuously measures the voltage of each of the three phases using a new microcomputer circuit design that senses under and over voltage, voltage unbalance, phase loss, and phase reversal. Protection is provided even when regenerated voltages are present. Includes a trip delay to prevent nuisance tripping and a restart delay to prevent short cycling after a momentary power outage.
  • Protects Against:
    • Phase Loss
    • Phase Reversal
    • Under, Over, & Unbalanced Voltages
    • Short Cycling
  • Fixed Trip Points and Delays
  • Fixed Voltages from 208 - 480 V AC
  • Isolated 10 A, SPDT Relay Contacts
  • Bi-color LED Indicator Shows: Output Status, Faults, Time Delays and Phase Reversal
  • ASME A17.1 rule 210.6
  • NEMA MG1 14:30, 14:35
  • IEEE C62.41 - 1991 Level B
Sort By:
1 2 3 ... 6
SSAC Symcom DLMHBRAAA
SSAC Symcom DLMHBRAAA - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $409.07

3Ph Volt Mon 500-600VAC Restart Delay on Restore more info
SSAC Symcom DLMUBLAAA
SSAC Symcom DLMUBLAAA - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $409.07

3Ph Volt Mon 200-480VAC Restart Delay on Trip more info
SSAC Symcom DLMUBNAAN
SSAC Symcom DLMUBNAAN - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $409.07

3Ph Volt Mon 200-480VAC No Restart Delay more info
SSAC Symcom DLMUBRAAA
SSAC Symcom DLMUBRAAA - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $409.07

3 PH Volt Mon 200-480VAC Restart Delay on Restore more info
SSAC Symcom HLMUDLAAA
SSAC Symcom HLMUDLAAA - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $281.84

3Ph Volt Mon 200-480VAC Adj Restart Delay on trip more info
SSAC Symcom HLMUDN0405N
SSAC Symcom HLMUDN0405N - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $281.84

3Ph Volt Mon 200-480VAC 4% 5s No Restart Delay more info
SSAC Symcom HLMUDNAAN
SSAC Symcom HLMUDNAAN - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $281.84

3Ph Volt Mon 200-480VAC Adj No Restart Delay more info
SSAC Symcom HLMUDRAAA
SSAC Symcom HLMUDRAAA - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $281.84

3Ph VM 200-480VAC Adj Restart Delay on Restore more info
SSAC Symcom PLM6405
SSAC Symcom PLM6405 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $216.29

3Ph Voltage Monitor 240VAC 4% 5s 8Pin more info
SSAC Symcom PLM6502
SSAC Symcom PLM6502 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 240VAC 5% 2s 8Pin more info
SSAC Symcom PLM6805
SSAC Symcom PLM6805 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 240VAC 8% 5s 8Pin more info
SSAC Symcom PLM8405
SSAC Symcom PLM8405 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 380VAC 4% 5s 8Pin more info
SSAC Symcom PLM9405
SSAC Symcom PLM9405 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 480VAC 4% 5s 8Pin more info
SSAC Symcom PLM9502
SSAC Symcom PLM9502 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 480VAC 5% 2s 8Pin more info
SSAC Symcom PLM9805
SSAC Symcom PLM9805 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $225.29

3Ph Voltage Monitor 480VAC 8% 5s 8Pin more info
SSAC Symcom PLMU11
SSAC Symcom PLMU11 - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $267.11

3Ph Voltage Monitor 200-480VAC Adj 8Pin more info
SSAC Symcom PLR120A
SSAC Symcom PLR120A - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $194.53

3Ph Voltage Monitor 120VAC 8Pin more info
SSAC Symcom PLR240A
SSAC Symcom PLR240A - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $194.53

3Ph Voltage Monitor 240VAC 8Pin more info
SSAC Symcom PLR380A
SSAC Symcom PLR380A - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $194.53

3Ph Voltage Monitor 380VAC 8Pin more info
SSAC Symcom PLR480A
SSAC Symcom PLR480A - 3-PHASE VOLTAGE MONITORS (previously made by ABB)
Price: $194.53

3Ph Voltage Monitor 480VAC 8Pin more info
   
 
1 2 3 ... 6