Series 810 - Micro-Vickers Hardness Testing Machines

Features

• A wide range of test force from 9.807 X10-3N to 9.807N (10gf to 1000gf) is available for measuring a various type of specimens. The load duration can be sit in 1sec increments between 5 and 99 sec.
• Up to 3 Objective lenses and 1 or 2 indenters mounted on manual or motorized turret
• Eyepiece or CCTV
• Measuring Versions
• Camera port

Series 810 - Micro-Vickers Hardness Testing Machines

Features

• The latest technology electromagnetic force motor used in the loading mechanism enables the test force to be freely selected (see test force specifications).
• The long working distance objectives used enable a very comfortable working distance between the objective and the specimen surface. This greatly reduces the possibility of collision between the specimen and the objective during focusing operations.
• Newly designed 'MH Plan' objectives are optimized for measuring indentation images.
• LEDs, which have a longer life, produce less heat, consume less power and are more energy efficient than incandescent bulbs, are employed for the illumination system.

Series 810 - Automatic Vickers Hardness Testing System

Features

• It can perform all operations required in the Vickers hardness test and Knoop hardness test such as loading, turret indexing, focusing, indentation dimension detecting, and measurement position movement in full automatic, so it is optimal for labor saving requirements of your test environment.
• An indentation dimension automatic detecting time of 0.3 seconds is achieved (when a PC with recommended specifications is ued), which dramatically improves operation efficiency.

Series 810 - Micro Zone Test System

Features

• When it comes to evaluating mechanical properties of ultra-small regions of ultra-fine specimens, the MZT-500 Series models are exceptionally powerful tools in the fields of research and development and quality control. The MZT-500 can evaluate mechanical properties, which conventional hardness testing machines for fine specimens cannot measure, such as various CVD and PVD-deposited or generated films, including ion-plated films; hardness of ultra-fine cross-secionts; bonding mechanical properties; and mechanical wear properties of carbon fibers, glass fibers, whiskers, etc.

SERIES 810 — Vickers Hardness Testing Machines

Features

• A wide range of test forces from 1.961N to 490.3N* (.2kgf - 50kgf) is available for measuring a wide variety of specimens.The load duration can be set in 1sec increments between 5 and 99sec.The minimum reading of indentation is 0.1µm. It allows small indentations to be measured with high precision.