Pushbutton Enclosures - NEMA 4, 4X

Application

• Designed to accept standard heavy duty oil tight pushbuttons, switches and pilot lights.
• Provides protection from dirt, dust, oil and large amounts of water from any angle, or where highly corrosive conditions exist.
  

Standards

• UL 508 Type 4 and 4X
• CSA Type 4 and 4X
• Complies with
  • NEMA Type 3R, 4 and 4X
  • JIC Standard EGP-1-1967
  • IEC 60529, IP66
• Appropriate components are required to maintain these standards.

Construction

• Formed 14 gauge stainless steel except A and B which are 16 gauge.
  304 or 316 SS.
• Smooth continuously welded seams.
• Welded brackets provide for enclosure mounting.
• Captive stainless steel cover screws thread into sealed wells.
• Larger enclosures provide internally hinged removable covers, designed to hold the cover open during wiring.
• Oil resistant gasket and adhesive.
• A grounding stud is provided in the enclosure.
  

Finish

• Natural stainless steel with a smooth brushed finish.

Accessories

• Hole Plugs