1422 Series Two Door Wallmount Enclosures - NEMA 12

Continuous Hinge

Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Provides a degree of protection from falling dirt, dust, oil and water.
  

Standards

• UL 508 Type 12
• CSA Type 12
• Complies with
  • NEMA Type 12
  • IEC 60529, IP54
    

Construction

• Enclosures are formed 12 or 14 gauge steel, as noted.
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Body stiffeners are provided in enclosures 30” high or more for extra rigidity.
• Welded brackets provide for enclosure mounting.
• Gasketed overlapping doors eliminate the need for a center post.
• Continuously hinged doors may be removed by pulling the hinge pin.
• Doors are secured with a three point latch and operated with a key locking automotive type handle.
• Latch rods are equipped with rollers for easier door closing.
• Oil resistant gaskets are permanently secured.
• A removable 10 gauge inner panel is included in enclosures as noted.
• Smaller sizes include a 12 gauge inner panel.
• Collar studs are provided for mounting inner panels.
• A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are phos­phat­ized and finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside.
• Removable inner panel is finished in white powder coating.

Accessories

• Air Conditioners
• Blowers
• Breather kits
• Door stop kits
• Drip Shield Kits
• Enclosure stabilizers
• Filter fans
• Floor stand kits
• Gland plates
• Heaters
• Light kit
• Louvered ventilating plates
• Thermostats
• Window kits