You are here: Home > Electrical Enclosures > Industrial Enclosures > 1418 Series Single Door Freestanding, Single or Dual Access Enclosures by Hammond Mfg

We found 24 results matching your criteria.

1418 Series Single Door Freestanding Enclosures - NEMA 12

Single or Dual Access

Application

Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
Provides a degree of protection from falling dirt, dust, oil and water.
Available with front access only or both front and rear access.
A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.

Standards

UL 508 Type 12
CSA Type 12
Complies with
- NEMA Type 12
- IEC 60529, IP54

Construction

Formed 12 gauge steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Lifting eyes provide for easy enclosure handling.
Doors are supported with heavy gauge continuous hinges.
Doors are secured with a three point latch and operated with a key locking automotive type handle.
Latch rods are equipped with rollers for easier door closing.
Oil resistant gaskets are permanently secured and mechanically retained.
Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).

Finish

Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside.
Optional inner panels, rails, frames and supports are finished in white powder coating.

Accessories

Air conditioners
Blowers
Breather Kits
Door Stop Kits
Drip Shield Kits
Filter Fans
Floor stand kits
Gland plates
Heaters
Inner panels
Light kit
Louvered Ventilating Plates
Swing Frame
Thermostats
Window kits

Dual Access	A	B	C	F	G	Optional	Ship
Part No.	A	B	C	F	G	Full Panel¹	Wt. lbs
1418WD24	72.06	24.06	24.06	38.03	29.13	72WFW	325
1418XD24	72.06	30.06	24.06	38.03	29.13	72XFW	424
1418YD24	72.06	36.06	24.06	38.03	29.13	72YFW	474
1418YYD24	90.06	36.06	24.06	47.03	38.13	90YFW	540
1418WD30	72.06	24.06	30.03	38.03	29.13	72WFW	375
1418WD36	72.06	24.06	36.06	38.03	29.13	72WFW	425
1418YD36	72.06	36.06	36.06	38.03	29.13	72YFW	495
1418YYD36	90.06	36.06	36.06	47.03	38.13	90YFW	555
¹ Refers to optional full height/full width panels. Depth panels and half height width panels are also available.

Single Access	A	B	C	F	G	Optional	Ship
Part No.	A	B	C	F	G	Full Panel¹	Wt. lbs
1418TW18	60.06	24.06	18.06	32.03	23.13	60TWFW	210
1418W18	72.06	24.06	18.06	38.03	29.13	72WFW	246
1418X18	72.06	30.06	18.06	38.03	29.13	72XFW	285
1418Y18	72.06	36.06	18.06	38.03	29.13	72YFW	325
1418YW20	90.06	24.06	20.06	47.03	38.13	90YWFW	313
1418YY20	90.06	36.06	20.06	47.03	38.13	90YFW	406
1418TY24	60.06	36.06	24.06	32.03	23.13	60TYFW	325
1418W24	72.06	24.06	24.06	38.03	29.13	72WFW	300
1418X24	72.06	30.06	24.06	38.03	29.13	72XFW	335
1418Y24	72.06	36.06	24.06	38.03	29.13	72YFW	370
1418YY24	90.06	36.06	24.06	47.03	38.13	90YFW	440
1418W30	72.06	24.06	30.06	38.03	29.13	72WFW	355
1418Y30	72.06	36.06	30.06	38.03	29.13	72YFW	420
1418W36	72.06	24.06	36.06	38.03	29.13	72WFW	400
1418Y36	72.06	36.06	36.06	38.03	29.13	72YFW	465
1418YY36	90.06	36.06	36.06	47.03	38.13	90YFW	525
¹ Refers to optional full height/full width panels. Depth panels and half height width panels are also available.