• Two piece construction and designed to withstand even the most severe process applications •
“Continuous use” seals - backing plate will prevent diaphragm from
rupturing if pressure sensing instrument fails. Pressure will be held
until instrument is replaced • Diaphragm is separable for servicing and is available with a 1/8” NPT or 1/4” NPT flushing connection for removing any material which may clog the process connection • Diaphragm is constructed of AISI
316L stainless steel and welded to the upper chamber of the seal for
pressures 30 psi (200 kPa) and above; Viton® for ranges from 30” Hg
Vacuum (-100 kPa) up to 100 psi (690 kPa). Others available • Viton® is highly recommended for applications less than 10 psi • ASME B40.100 compliant • CRN registered (all 316 SS only) • 1 year warranty
Applications:
•
Where the process fluid is corrosive or viscous and would clog
instrument internals/solidify within the pressure gauge, switch or
transmitter
Bottom: 1/4”, 1/2”, 3/4” and 1” NPT Top: 1/4” and 1/2” NPT
Process Temperature
-22°F to 212°F (-30°C to 100°C)
Other
Flushing connections available. Other materials such as Teflon®, PVC, Carbon steel, Alloy 20, Hastelloy® B, Titanium, Tantalum, etc. are available upon request
