|
1418 Series Single Door Aluminum Enclosures
NEMA 4 - Continuous Hinge, Clamped Cover
Application
- Designed for use as instrument enclosures, electric,
hydraulic or pneumatic control housings, electrical junction boxes or
terminal wiring enclosures.
- Provides protection where equipment may be hosed down
or otherwise be very wet, or in specific applications where corrosion
may be a problem.
Standards
- UL 508 Type 4 and 12 as marked
- CSA Type 4 and 12
- Complies with
- NEMA Type 4, 12 and 13
- JIC EGP-1-1967
- IEC 60529, IP66
Construction
- Formed from 0.10" Type 5052 H-32 aluminum.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Door and body stiffeners are provided in the larger enclosures for extra rigidity.
- Welded brackets provide for enclosure mounting.
- Formed lip on door and enclosure excludes flowing liquids and contaminants.
- Aluminum continuous hinge on door may be removed by pulling the aluminum hinge pin.
- Door is secured with easily operated aluminum clamps.
- Provision for padlocking.
- Oil resistant gaskets are permanently secured.
- A removable 12 gauge inner panel is included.
- Collar studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are natural unfinished aluminum.
- Removable inner panel is finished in white powder coating.
Accessories- Additional inner panels
- Breather kits
- Door stop kits
- Heaters
- Lock Kit
- Terminal kit assemblies
- Thermostats
- Window kits
|
|
|
