Additional Accessories by Reelcraft
|
|
|
|
|
Additional reel accessories including brackets and bases, chain shrouds, adapter assembly, battery box and display stands.
|
|
|
|
Adjustable Hose Bumpers by Reelcraft
|
|
|
|
|
Adjustable hose bumpers are solid molded rubber assuring a long life and nonslip grip. Hose bumpers allow the desired length of hose to be permanently stored outside the reel. Hose bumpers are included on the reels purchased with hose. Reels purchased without hose do not include the hose bumper. When ordering, advise the part number, reel model and the hose I.D. and O.D.
|
|
|
|
Circuit Breaker by Reelcraft
|
|
|
|
|
40 AMP Circuit Breaker. Used with DC electric rewind motors. Manual reset, push-button must be pressed firmly to reset.
|
|
|
|
Inlet Hose Assemblies by Reelcraft
|
|
|
|
|
Reel inlet hose assemblies for low pressure, medium pressure, high pressure and twin welding hose reels.
|
|
|
|
Junction Box by Reelcraft
|
|
|
|
|
For explosion proof motor.
|
|
|
|
Mounting Bracket by Reelcraft
|
|
|
|
|
Combination mounting bracket for circuit, solenoid and starting switch.
|
|
|
|
Operating Switches by Reelcraft
|
|
|
|
|
A various assortment of rewind motor operating switches and switch accessories.
|
|
|
|
Replacement Hose Assemblies by Reelcraft
|
|
|
|
|
|
|
|
Replacement Hose Fittings Assemblies by Reelcraft
|
|
|
|
|
|
|
|
Rewind Motors by Reelcraft
|
|
|
|
|
Motor driven reels are equipped with electric or compressed air motors to drive chain and sprocket rewind mechanisms.
|
|
|
|
Roller Guide Assemblies by Reelcraft
|
|
|
|
|
Rollers handle speed and reduce wear on hose. All painted parts are finished with durable abrasion resistant baked-on powder coat. Delrin bearing surfaces give a quiet operation with minimum wear and all features combine to give trouble-free maximum service life.
|
|
|
|
Roller Hose Guide Assemblies by Reelcraft
|
|
|
|
|
These four-way roller guide assemblies are for use with reels on cabinet door openings and for similar locations where sharp edges may cut or damage the hose, four-way design permits pulling or retracting hose at any angle. A hose bumper should be used with the four-way roller hose guide assemblies to prevent damage to rollers and nozzles.
|
|
|
|
Starting Solenoids by Reelcraft
|
|
|
|
|
Starting solenoid, 12 VDC for activation of motor.
|
|
|
|
|