Designed for industrial applications requiring rugged reliable operation.  Provides an optically isolated high capacity solid state output, with power switching capability up to 20 A steady state, 200 A inrush.  Zero voltage switching SIR2 extends the life of an incandescent lamp up to 10 times.  Random switching SIR1 is ideal for inductive loads.  When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections. 

 

 

The SLR Series has no isolation between the control switch input and the solid state output.  Select the SLR for applications where the control switch is the same voltage source as the load.  Provides the noiseless, reliability and long life of a solid state relay without the cost of isolation circuitry.  Zero voltage switching SLR2 can extend the life of an incandescent lamp up to 10 times its normal life.  Random switching SLR1 is normally used for inductuve loads.  When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.

 

The NLF1 and NLF2 provide a Flip-Flop latching function.  Each time the control switch is closed, the solid state output changes state and latches.  The NLF Series has no isolation between the control switch and the solid state ouput, which lowers cost and reduces the number of connections required. For use where the control switch is the same voltage source as the load.  Zero voltage switching NLF2 extends the life of an incandescent lamp up to 10 times.  Random switching NLF1 is ideal for inductive loads.  When accessory fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.