Call Our Experts:
1-512-973-3500
You are here: Home > Electrical > Control, Timing & Solid State Relays > Timing Relays > Delay on Make (ON Delay), Single Function Timers
We found 36 results matching your criteria.
Delay On Make
TDML, TDM, TDMH Series
Time Delay Relay
 
The TDM Series is a delay on make timer that combines accurate digital circuitry with isolated DPDT relay contacts in an industry standard 8 pin plug-in package.  DIP switch adjustment allows precise selection of the time delay over the full time delay range.  The TDM Series is the product of choice for custom control panel and OEM designers.
  • Switch Settable Time Delay
  • Three Time Ranges from 100 ms - 10,230 s
  • +/-0.1% Repeat Accuracy
  • +/-2% Setting Accuracy
  • DPDT, 10 A Output Contacts
  • LED Indication
Delay On Make
TRM Series
Time Delay Relay
 
The TRM Series is a combination of analog electronic circuitry and electromechanical relay output.  It provides input to output isolation with a wide variety of input voltages and time ranges.  Standard plug-in base wiring, fast reset, rugged enclosure, and good repeat accuracy make the TRM a select choice in any OEM application.
  • 10 A DPDT or SPDT Output Contacts
  • 24 - 230 V Operation in Ranges
  • Octal 8 or 11 Pin Plug-in
  • Fixed or Adjustable Delays from 0.05 to 600 s in ranges
  • +/-2% Repeat Accuracy
  • Hold Down Clamps Available
Delay On Make
PRLM Series
Time Delay Relay
 
The PRLM Series is designed for use in non-critical timing applications.  It offers low cost knob adjustable timing control, full 10 A relay output, and onboard LED indication.  The knob adjustment provides a guaranteed time range of up to 10 minutes in 6 ranges.  The onboard LED indicates whether or not the unit is timing (flashing LED) as well as the status of the output.
  • Knob Adjustable Time Delay Relay
  • Electronic Circuit with Electromechanical Relay
  • Popular AC & DC Operating Voltages
  • Industry Standard Octal Plug-in Connection
  • Time Delays to 600s in 6 Ranges
  • +/-2% Repeat Accuracy
  • +/-10% Factory Calibration
  • LED Indication
  • 10 A Rated DPDT Relay Output
Delay On Make
HRDM Power-Time
Time Delay Relay
 
The HRDM Series combines an electromechanical relay output with microcontroller timing circuitry.  It offers 12 to 230 V operation in five ranges and factory fixed, external, or onboard adjustable time delays with a repeat accuracy of +/-0.5%.  The output contact rating allows for direct operation of heavy loads such as compressors, pumps, blower motors, heaters, etc.  This series is ideal for OEM applications where cost is a factor.
  • 30 A SPDT N.O. Output Contact
  • 12 - 230 V Operation in 5 Ranges
  • Encapsulated Circuitry
  • Delays from 100 ms - 100 m in 5 Ranges
  • +/-0.5% Repeat Accuracy
  • Fixed, External, or Onboard Adjustment
Delay On Make
ERDM Econo-Timer
Time Delay Relay
 
Econo-Timers are a combination of digital electronics and a reliable electromechanical relay.  These devices offer a DPDT relay output for relay logic circuits, and isolation of input to output voltages.  Cost effective for OEM applications such as random starting, sequencing ON, switch de-bouncing, anti-short cycling, and other common delay on make applications.
  • Knob or External Adjust or Factory Fixed
  • Delays from 0.1 s - 1000 m
  • +/-0.5% Repeat Accuracy
  • Encapsulated Digital Circuitry
  • 10 A, Isolated, DPDT Output Contacts
Delay On Make
ORM Series
Time Delay Relay
 
The ORM Series features open PC board construction for reduced cost.  It has isolated 10 A DPDT relay contacts and all connections are 0.25 in (6.35 mm) male quick connect terminals.  The time delay may be ordered as factory fixed, onboard knob, or external adjustment.  Time delays from 0.05 to 300 seconds.
  • Low Cost Open PCB Construction
  • Time Delays From 50 ms - 300 s in 5 Ranges
  • 10 A Double Pole Double Throw Relay Output
  • +/-2% Repeat Accuracy
  • +/-10% Factory Calibration
  • Fixed, Adjustable on Unit, or External Adjust
Delay On Make
KRDM Digi-Timer
Time Delay Relay
 
The KRDM Series is a compact time delay relay measuring only 2 in. (50.8 mm) square.  Its solid state timing circuit provides excellent repeat accuracy and stability.  Encapsulation protects against shock, vibration, and humidity.  The KRDM Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. 
  • Compact Time Delay Relay
  • Full 10 A SPDT Output Contacts
  • Onboard or External Adjust or Fixed Delay
  • Delays from 100 ms - 100 m in 5 Ranges
  • +/-0.5% Repeat Accuracy
  • +/-5% Factory Calibration
  • Input Voltages from 12 - 230 V in 5 Ranges
Delay On Make
TDU, KSDU Digi-Set
Timing Modules
 
The TDU and KSDU Series are encapsulated solid state delay on make timers that combine digital timing circuitry with universal voltage operation.  The TDU offers DIP switch adjustment allowing accurate selection of the time delay over the full time delay range. The KSDU is factory fixed from 0.1 - 10,230 s and does not include the DIP switch.  These series are excellent choices for process control systems and OEM equipment.
  • 2 Universal Voltage Ranges From 24 - 240 V AC/DC
  • Digital Integrated Circuitry
  • Switch Selectable Delays From 0.1 s - 2.8 h in 3 Ranges or Factory Fixed
  • +/-0.5% Repeat Accuracy
  • 1 A Steady - 10 A Inrush
  • Totally Solid State and Encapsulated
Delay On Make
TMV8000 / TSU2000 Uni-Timer
Timing Module
 
The TMV and TSU Series are universal voltage delay on make timers.  Two models cover all the popular voltages and time delays.  Available with knob or external adjust time delay.  Its simple two terminals can easily be connected in series with a relay coil, contactor coil, solenoid, lamps, small motor, etc., to delay their energization, prevent short cycling or to sequence on various loads.
  • Operates From 24 - 240 V AC/DC
  • Knob or External Adjust Time Delays
  • Delays from 0.1 - 8 m
  • Totally Solid State - Encapsulated
  • 1 A Steady - 10 A Inrush
  • Two Terminal Series Connection with Load
Delay On Make
TSD1 Digi-Timer
Timing Module
 
The TSD Series is designed for more demanding commercial and industrial applications where small size, and accurate performance is required.  The factory calibration for fixed time delays is within 1% of the target time delay.  The repeat accuracy, under stable conditions, is 0.1% of the time delay.  The TSD Series is rated to operate over an extended temperature range.  Time delays of 0.1 seconds to 100 hours are avialable.  The output is rated 1 A steady and 10 A inrush.  The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable Delays From 0.1 s - 100 h
  • +/-0.1% Repeat Accuracy
  • +/-1% Factory Calibration
  • 12 - 230 V in 6 Ranges
  • 1 A Solid State Output
  • Encapsulated
Delay On Make
THDM Digi-Power
Power Timing Module
 
The THDM Series is a high power solid state delay on make timer that is connected in series with the load.  The THDM eliminates the need for a timer and a seperate solid state relay.  A cost effective approach for controlling larger loads such as motor, electric heating elements, and lamps.  When mounted on a metal surface, it can switch loads up to 20 Amps steady, 200 Amps inrush.
  • High Load Currents up to 20 A, 200 A Inrush
  • Simple-to-use Two Terminal Series Connection
  • +/-0.5% Repeat Accuracy
  • Fixed or Adjustable Delays From 1 s - 1000 m
  • +/-10% Factory Calibration
  • 24, 120, or 230 V AC
  • Metallized Mounting Surface for Heat Transfer
  • Solid State & Encapsulated
Delay On Make
THD1 Digi-Power
Power Timing Module
 
The THD Series combines accurate timing circuitry with high power solid state switching.  It can switch motors, lamps, and heaters directly without a contactor.  You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers.
  • High Load Currents up to 20 A, 200 A Inrush
  • Fixed or Adjustable Delays From 0.1 s - 1000 m
  • +/-0.5% Repeat Accuracy
  • +/-1% Factory Calibration
  • 24, 120, or 230 V AC
  • Metallized Mounting Surface for Efficient Heat Transfer
  • Totally Solid State and Encapsulated
Delay On Make
KSD1 Digi-Timer
Timing Module
 
The KSD1 Series features two-terminal, series-connection with the load. The KSD1 Series is an ideal choice for delay on make timing applications. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable Delays from 0.1 s - 1000 min in 6 Ranges
  • +/-0.5% Repeat Accuracy
  • +/-5% Factory Calibration
  • 12 - 230 V in 5 Ranges
  • 1 A Solid State Output
  • Encapsulated
Delay On Make
TS1 Versa-Timer
Timing Module
 
Versa-Timer offers proven reliability and performance with years of use in OEM equipment and commercial applications. This encapsulated general use timing module is capable of controlling load currents ranging from 5 mA to 1 A. May be connected in series with contactors, relays, valves, solenoids, small motors, and lamps.
  • Two Terminal Series Connection with Load
  • 5 mA - 1 A Load Currents
  • Totally Solid State - Encapsulated
  • +/-2% Repeat Accuracy
  • Fixed or Adjustable Delays From 50 ms - 10 m in 8 Ranges
Delay On Make
TH1 Series
Power Timing Module
 
The TH1 Series is a solid state relay and timer combined into one compact, easy-to-use control. This highly reliable device eliminates the need for a separate solid state relay. When mounted to a metal surface, it can switch load currents up to 20 A steady state, and 200 A inrush.
  • High Current Load Capacity up to 20 A with 200 A Inrush
  • Solid State Switching - No Contact Wear or Arcing
  • Encapsulated
  • Fixed or Adjustable Time Delays From 0.1 - 600 s in
  • +/-2% Repeat Accuracy
  • +/-5% Factory Calibration
  • Metallized Mounting Surface for Efficient Heat Transfer
Delay On Make
MSM PC Mount Timer
Timing Module
 
The MSM replaces bi-metal type timing with reliable solid state circuitry. There are no moving parts to arc or wear. It is a cost effective solution for OEM designers. It is available for printed circuit board mounting or surface mounting with a removable bracket and wire leads. The MSM offers immediate reset on removal of power.
  • Printed Circuit Mount or Wire Leads
  • Fixed Delays from 0.05 - 180 s
  • +/- 5% Repeat Accuracy
  • +/- 15% Factory Calibration
  • Two-Wire Series Connection with the Load
  • Fast Reset

 

Sort By:
1 2
High Power Delay-on-Make Time Delay Relay, Mars 32383
High Power Delay-on-Make Time Delay Relay, Mars 32383
Price: $118.96

HIGH LOAD DELAY-0N-MAKE more info
Solid State Timer, Delay on Make, Mars 32391
Solid State Timer, Delay on Make, Mars 32391
Price: $51.19

ADJ DELAY-ON-MAKE more info
Solid State Timer, Delay on Make, Mars 32394
Solid State Timer, Delay on Make, Mars 32394
Price: $91.80

DIGITAL TIMER 18-240V more info
Solid State Timer, Delay on Make, Mars 32396
Solid State Timer, Delay on Make, Mars 32396
Price: $86.61

DIGITAL TMER 80-288V more info
Solid State Timer, Delay on Make, Mars 32399
Solid State Timer, Delay on Make, Mars 32399
Price: $115.34

D-O-M TMR 230V 10AMP more info
Sprecher + Schuh RZ7-FEA1SU22
Sprecher + Schuh RZ7-FEA1SU22

Timing Relay more info
Sprecher + Schuh RZ7-FEA3TU23
Sprecher + Schuh RZ7-FEA3TU23
Price: $135.00

Timing Relay more info
Sprecher + Schuh RZ7-FSA3AU23
Sprecher + Schuh RZ7-FSA3AU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3BU23
Sprecher + Schuh RZ7-FSA3BU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3CU23
Sprecher + Schuh RZ7-FSA3CU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3DU23
Sprecher + Schuh RZ7-FSA3DU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3EU23
Sprecher + Schuh RZ7-FSA3EU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3FU23
Sprecher + Schuh RZ7-FSA3FU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3GU23
Sprecher + Schuh RZ7-FSA3GU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3HU23
Sprecher + Schuh RZ7-FSA3HU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3IU23
Sprecher + Schuh RZ7-FSA3IU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3JU23
Sprecher + Schuh RZ7-FSA3JU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3KU23
Sprecher + Schuh RZ7-FSA3KU23
Price: $100.37

Timing Relay more info
Sprecher + Schuh RZ7-FSA3LU23
Sprecher + Schuh RZ7-FSA3LU23
Price: $68.34

Timing Relay more info
Sprecher + Schuh RZ7-FSA3UU23
Sprecher + Schuh RZ7-FSA3UU23
Price: $105.29

Timing Relay more info
   
 
1 2