Delay On Make - Normally Closed
TSD4 Digi-Timer
Timing Module
The TSD4 Digi-Timer is a delay on make timer with a normally closed solid state output. The load is energized prior to and during the delay period. The TSD Series is designed for more demanding commercial and industrial applications where small size, and accurate performance is required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1 A steady and 10 A inrush. The modules are 7 totally solid state and encapsulated to protect the electronic circuitry.
Delay On Make - Normally Closed
THD4 Digi-Power
Timing Module
The THD4 utilizes solid state circuitry and a solid state relay in one easy to use control. The metallized mounting surface allows a metal panel to dissipate heat rather than adding an expensive heat sink. The solid state output is rated 6, 10, or 20 amps steady and up to 200 amps inrush. Motors, heaters and valves can be switched directly, eliminating the expense of a separate contactor. The THD4 offers substantial performance, reliability, and cost advantages for OEM designers.
-
Load Energized Prior To and During Timing
-
High Load Current Capacity up to 20 A, 200 A Inrush
-
+/- 0.5% Repeat Accuracy
-
+/- 1% Factory Calibration
-
Totally Solid State and Encapsulated
-
Fixed or Adjustable Delays From 0.1 s - 1000 m in 6 Ranges
Delay On Make - Normally Closed
KSD4 Digi-Timer
Timing Module
The KSD4 Digi-Timer offers a delay on make function with normally closed solid state output. The load is energized prior to and during the time delay. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for input voltages of 24, 120 or 230 V AC. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
Delay On Make - Normally Closed
TS4 Series
Versa Timing Module
The TS4 Versa-Timer is an analog delay on make timer with a normally closed solid state output. Unlike an Interval Timer, the load is energized prior to and during the time delay period. It can be used as a faster starting Interval time delay when S1 is closed upon application of input voltage.
|
