Call Our Experts:
1-877-934-3585
You are here: Home > Electrical > Electrical Motor Control > Control, Timing & Solid State Relays > Timing Relays > Delay on Break (OFF Delay), Single Function Timers
We found 42 results matching your criteria.
Delay On Break (Release)
TDBL, TDB, TDBH Digi-Set
Time Delay Relay
 
The TDB Series combines accurate digital circuitry with isolated 10 A rated DPDT or SPDT relay contacts in an 8 or 11 pin plug-in package. The TDB Series features DIP switch selectable time delays ranging from 100 milliseconds to 10,230 seconds in three ranges. The TDB Series is the product of choice for custom control panel and OEM designers.
  • Switch Settable Time Delay
  • Three Time Ranges from 100 ms - 10,230 s
  • +/- 0.1% Repeat Accuracy
  • +/- 2% Setting Accuracy
  • SPDT or DPDT, 10 A Output Contacts
  • LED Indication
Delay On Break (Release)
TRB Series
Time Delay Relay
 
The TRB Series combines a 10 A isolated electromechanical relay output with analog timing circuitry. False trigger of the TRB by a transient is unlikely because of the complete isolation of the circuit from the line prior to initiation. The initiate contact is common to one side of the line and may be utilized to operate other loads. Installation is easy due to the TRB’s industry standard 8 or 11 pin plug-in base wiring.
  • Knob Adjustable Time Delays
  • Fixed or Adjustable Delays from 0.05 - 600 s in Ranges
  • +/- 2% Repeat Accuracy
  • AC and DC Operating Voltages are Available
  • 10 A, Isolated SPDT and DPDT Contacts
Delay On Break (Release)
PRLB Series
Time Delay Relay
 
The PRLB Series is designed for use on non-critical timing applications. It offers low cost knob adjustable timing control, full 10 A relay output, and onboard LED indication. The knob adjustment provides a guaranteed time range of up to 10 minutes in 6 ranges. The onboard LED indicates whether or not the unit is timing (flashing LED) as well as the status of the output.
  • Knob Adjustable Time Delay Relay
  • Electronic Circuit with Electromechanical Relay
  • Popular AC & DC Operating Voltages
  • Industry Standard Octal Plug-in Connection
  • Time Delays to 600 s in 6 Ranges
  • +/- 2% Repeat Accuracy
  • +/- 10% Factory Calibration
  • LED Indication
  • 10 A SPDT Relay Output
Delay On Break (Release)
HRDB Power-Time
Time Delay Relay
 
The HRDB Series combines an electromechanical relay output with microcontroller timing circuitry. The HRDB offers 12 to 230 V operation in five ranges and factory fixed, external, or onboard adjustable time delays with a repeat accuracy of +/-0.5%. The isolated output contact rating allows for direct operation of heavy loads such as compressors, pumps, blower motors, heaters, etc. The HRDB is ideal for OEM applications where cost is a factor.
  • 30 A SPDT N.O. Isolated Output Contacts
  • 12 - 230 V Operation in 5 Ranges
  • Delays from 100 ms - 100 m in 5 Ranges
  • +/- 0.5% Repeat Accuracy
  • Fixed, External, or Onboard Adjustment
Delay On Break (Release)
ORB Series
Time Delay Relay
 
The ORB Series open PCB construction offers the user good economy without sacrificing performance and reliability. The output relay is available in isolated 10 A double pole double throw or single pole double throw forms. The time delay may be ordered as factory fixed, onboard knob, or external adjustment. All connections are 0.25 in. (6.35 mm) male quick connect terminals.
  • Low Cost Open PCB Construction
  • 10 A DPDT or SPDT Relay Contacts
  • Line Voltage Initiation
  • Delays From 50 ms - 300 s in 5 Ranges
  • +/- 2% Repeat Accuracy
  • +/- 10% Factory Calibration
Delay On Break (Release)
KRDB Digi-Timer
Time Delay Relay
 
The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life.
  • Compact Time Delay Relay
  • Microcontroller Circuitry, +/- 0.5% Repeat Accuracy
  • Isolated 10 A SPDT Output Contacts
  • Onboard or External Adjustment or Fixed Time Delay
  • Delays from 100 ms - 1000 m in 6 Ranges
  • Input Voltages from 12 - 230 V in 5 Ranges
  • +/- 5% Factory Calibration
Delay On Break (Release)
TDUB Digi-Set
Timing Module
 
 The TDUB Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240 V AC and 12 to 24 V DC are available in three ranges. The TDUB Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1 A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUB Series an excellent choice for process control systems and OEM equipment.
  • Switch Selectable Time Setting
  • 0.1 s - 102.3 m in 3 Ranges
  • +/- 0.5% Repeat Accuracy
  • +/- 2% Setting Accuracy
  • 1 A Solid State Output
  • Encapsulated
  • Wide Voltage Ranges
Delay On Break (Release)
TSDB Series
Timing Module
 
The TSD Series is designed for more demanding commercial and industrial applications where small size, and accurate performance is required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 1000 minutes are available. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable Delays 0.1 s - 1000 m in 6 Ranges
  • +/- 0.5% Repeat Accuracy
  • +/- 1% Factory Calibration
  • 12 VDC - 230 VAC in 5 Ranges
  • 1 A Solid State Output
  • Encapsulated
Delay On Break (Release)
THDB Digi-Power
Power Timing Module
 
The THD Series combines accurate timing circuitry with high power solid state switching. It can switch motors, lamps, and heaters directly without a contactor. You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers.
  • High Load Currents up to 20 A, 200 A Inrush
  • Fixed or Adjustable Delays From 0.1 s - 1000 m
  • +/- 0.5% Repeat Accuracy
  • +/- 1% Factory Calibration
  • 24, 120, or 230 V AC
  • Metallized Mounting Surface for Efficient Heat Transfer
  • Totally Solid State and Encapsulated
Delay On Break (Release)
KSDB Digi-Timer
Timing Module
 
This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable 0.1 s - 1000 m in 6 Ranges
  • +/- 0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • 12 V DC - 230 V AC in 6 Ranges
  • 1 A Solid State Output
  • Encapsulated
Interval or Delay On Break
TSD7 Series
Timing Module
 
The TSD7 utilizes only two terminals connected in series with the load. Interval timing mode period is achieved by using a small portion of the AC sine wave allowing sufficient voltage for circuit operation. It can be used as an interval timer to control or pulse shape the operation of contactors, solenoids, relays, and lamp loads. The TSD7 can be wired to delay on the break of a switch for energy saving fan delays.
  • Two Terminal Series Connection to Load
  • Fixed or Adjustable Delays From 1 s - 1000 m
  • Digital Integrated Circuitry
  • +/-0.5% Repeat Accuracy
Interval or Delay On Break
THD7 Digi-Power
Timing Module
 
The THD7 utilizes only two terminals connected in series with the load. Interval timing mode is achieved by using a small portion of the AC sine wave allowing sufficient voltage for circuit operation. The THD7 can be used for interval or delay-on-break timing. It is designed to operate large loads directly, such as motors, heater elements, and motor starters.
  • Solid State Relay and Timer Combined
  • Two Terminal Series Connection to Load
  • Up to 20 A Solid State, 200 A Inrush
  • Fixed or Adjustable Delays From 1 s - 1000 m
  • +/-0.5% Repeat Accuracy
Delay On Break (Release)
TSB Series
Timing Module
 
The TSB Series is a totally solid state delay on break timing module. The TSB is available with a fixed, external, or onboard adjustable time delay. Time Delays from .05 to 600 seconds, in 4 standard ranges, cover over 90% of all OEM and commercial appliance timing applications. The repeat accuracy is +/-2%. Operating voltages of 24,120, or 230 V AC are available. The TSB’s 1A steady state, 10A rated solid state output is perfect for direct control of solenoids, contactors, relays, lamps, buzzers, and small heaters. The TSB can be surface mounted with a single screw, or snapped on 35 mm DIN rail using the P1023-20 adaptor.
  • Totally Solid State Encapsulated
  • Fixed or Adjustable Delays From 0.05 - 600 s in 4 Ranges
  • +/- 2% Repeat Accuracy
  • +/- 5% Factory Calibration

 

 
Sort By:
1 2 3
Fan Delay Timer, Mars 32377
Fan Delay Timer, Mars 32377
Price: $91.50

D-O-B TMR 24V 6 AMP more info
Fan Delay Timer, Mars 32379
Fan Delay Timer, Mars 32379
Price: $139.82

D-O-B TMR 230V 10AMP more info
Fan Delay Timer, Mars 32393
Fan Delay Timer, Mars 32393
Price: $42.45

FAN-DELAY TIMER more info
Macromatic TD-71622
Macromatic TD-71622
Price: $150.20 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TD-71628
Macromatic TD-71628
Price: $150.20 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-05
Macromatic TR-51622-05
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-07
Macromatic TR-51622-07
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-08
Macromatic TR-51622-08
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-09
Macromatic TR-51622-09
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-10
Macromatic TR-51622-10
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-12
Macromatic TR-51622-12
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-15
Macromatic TR-51622-15
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51622-22
Macromatic TR-51622-22
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51628-05
Macromatic TR-51628-05
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51628-08
Macromatic TR-51628-08
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Macromatic TR-51628-10
Macromatic TR-51628-10
Price: $121.80 TXMAS Eligible

OFF TIME DELAY RELAY more info
Solid State Timer, Delay on Break, Mars 32387
Solid State Timer, Delay on Break, Mars 32387
Price: $51.85

D-O-B 2 WIRE 24V more info
Solid State Timer, Delay on Break, Mars 32392
Solid State Timer, Delay on Break, Mars 32392
Price: $51.19

ADJ DELAY-ON-BREAK more info
Solid State Timer, Fixed Delay, Mars 32390
Solid State Timer, Fixed Delay, Mars 32390
Price: $49.80

24V 5 MIN DOB TIMER more info
Solid State Timer, Fixed Delay, Mars 32505
Solid State Timer, Fixed Delay, Mars 32505
Price: $28.33

24V 5 MIN DELAY ON BREAK TIMER more info
   
 
1 2 3