Call Our Experts:
1-877-934-3585
You are here: Home > Electrical > Electrical Motor Control > Control, Timing & Solid State Relays > Timing Relays > Recycling & Percentage, Single Function Timers
We found 15 results matching your criteria.
Recycling (Pulse Generator)
TDR Digi-Set
Time Delay Relay
 
The TDR Series of time delay relays are comprised of digital circuitry and a 10 A isolated relay output. The ON and OFF delays are selected by means of two ten position binary switches, which allow the setting of the desired delay the first time and every time.
  • Switch Settable Time Delays - Both Times Adjustable
  • 0.1 s - 2.8 h in 3 Ranges
  • +/- 0.1% Repeat Accuracy
  • +/- 2% Setting Accuracy
  • 10 A DPDT Isolated Relay Contacts
  • Octal Plug-in Base Connection
Recycling (Pulse Generator)
HRDR Power-Time
Time Delay Relay
 
The HRDR Series combines an electromechanical relay and microcontroller timing circuitry. It offers 12 to 230 V operation in five ranges and factory fixed, onboard or externally adjustable time delays with a repeat accuracy of +/-0.5%. The high switching capacity of the output contacts allow for direct control of heavy loads like compressors, pumps, motors, heaters, and lighting. Bypass/reset switch option allows operator to interrupt normal recycling sequence and energize output relay. An excellent choice for OEM applications.
  • 30 A SPDT N.O. Output Contacts
  • 12 - 230 V Operation in 5 Ranges
  • Encapsulated Circuitry
  • Delays from 100 ms - 1000 m in 6 Ranges
  • Independent Adjustment of ON and OFF Delays
  • +/- 0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • Fixed or Onboard or External Adjustment
Recycling (Flasher)
HRD3 Power-Time
Time Delay Relay
 
The HRD3 Series combines an electromechanical relay output with microcontroller timing circuitry. It offers 12 to 230 V operation in five ranges and factory fixed, external, or onboard adjustable time delays with a repeat accuracy of +/-0.5%. The output contact rating allows for direct operation of heavy loads such as compressors, pumps, blower motors, heaters, etc. This series is ideal for OEM applications where cost is a factor.
  • Equal ON and OFF Delays
  • 30 A SPDT N.O. Output Contacts
  • 12 - 230 V Operation in 5 Ranges
  • Encapsulated Circuitry
  • Delays from 100 ms - 100 m in 5 Ranges
  • +/- 0.5% Repeat Accuracy
  • Fixed, External, Onboard Adjustment
Recycling (Flasher)
ERD3 Econo-Timer
Time Delay Relay
 
Econo-Timers are a combination of digital electronics and a reliable electromechanical relay. DPDT relay output for relay logic circuits, and isolation of input to output voltages. Cost effective for OEM applications such as duty cycling, drying, washing, signaling, and flashing. 
  • Knob, External Adjust or Factory Fixed
  • Delays From 0.1 s - 1000 m
  • +/-0.5% Repeat Accuracy
  • Encapsulated Digital Circuitry
  • 10 A, Isolated, DPDT Output Contacts
Recycling (Pulse Generator)
KRDR Digi-Timer
Time  Delay Relay
 
The KRDR Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its solid state timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDR Series is a cost effective recycling timer for OEM applications that require small size, isolation, reliability, and long life.
  • Compact Time Delay Relay
  • Full 10 A SPDT Output Contacts
  • Onboard Adjustment or Fixed Time Delay
  • Delays from 100 ms - 1000 m in 6 Ranges
  • Input Voltages from 120 - 230 V in 6 Ranges
  • +/-0.5% Repeat Accuracy
  • +/-5% Factory Calibration
Recycling (Flasher)
KRD3 Digi-Timer
Time Delay Relay
 
The KRD3 Series measures only 2 in. (50.8 mm) square. Its solid state timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRD3 Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life.
  • Compact Time Delay Relay
  • Full 10 A SPDT Output Contacts
  • Onboard or External Adjust or Fixed Delay
  • Delays from 100 ms - 100 m in 5 Ranges
  • +/-0.5% Repeat Accuracy
  • +/-5% Factory Calibration
  • Input Voltages from 12 - 230 V in 5 Ranges
Recycling (Pulse Generator)
RS Digi-Set
Timing Module
 
The RS Series is a solid state, encapsulated, recycling timer designed for tough industrial environments. It is used by many testing labs as a life cycle tester; by others as a cycle controller. The RS Series has separate DIP switch adjustments for the ON delay and the OFF delay. These make possible accurate adjustment the first time and every time. Time Delays of 0.1 seconds to 1023 hours are available in 4 ranges.
  • Accurate, Reliable Recycling Timer
  • Switch Settable Time Delays - Both Times Adjustable
  • +/-0.1% Repeat Accuracy
  • +/-2% Setting Accuracy
  • 0.1 s - 1023 h in 4 Ranges
  • 12 - 230 V in 5 Ranges
  • 1 A Solid State Output
  • Totally Solid State and Encapsulated
Recycling (Pulse Generator)
ESDR Recycle Timer
Timing Module
 
The ESDR Series offers independent time adjustment of both delay periods. Adjustment options include onboard adjust, external adjust or factory fixed. The ESDR is recommended for air drying, automatic oiling, life testing, chemical metering and automatic duty cycling. This series is designed for general purpose commercial and industrial applications where a small cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is <+/- 5%. The repeat accuracy, under stable conditions, is 0.1% of the selected time delay. This series is designed for input voltages of 12 V DC to 230 V AC in five ranges. Time delays of 0.1 seconds to 1000 minutes are available in six ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • ON/OFF Recycling with Independent Adjustment of Both the ON and OFF Periods
  • Onboard Adjust, External Adjust, or Fixed Time Delays
  • 0.1 s to 1000 m in 6 Ranges
  • +/-0.1% Repeat Accuracy
  • +/- 5% Factory Calibration
  • Available in AC or DC Voltages
Recycling (Pulse Generator)
TSDR Digi-Timer
Timing Module
 
The TSDR Digi-Timer is an ON/OFF or OFF/ON recycling timing module designed to control metering pumps, chemical valves, flash lamps, or use in energy saving or duty cycling applications. It may be ordered with both time delays factory fixed, or one delay fixed and the other delay external or onboard adjustable. The TSD Series is designed for more demanding commercial and industrial applications where small size, and accurate performance is required. The factory calibration for fixed time delays is < +/- 5%. The repeat accuracy, under stable conditions, is 0.5% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 1000 minutes are available. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable 0.1 s - 1000 m in 6 Ranges
  • +/-0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • 24, 120, or 230 V AC
  • 1 A Solid State Output
  • Encapsulated
Recycling (Pulse Generator)
KSDR Digi-Timer
Timing Module
 
The KSDR Series offers independent time adjustment of both delay periods. The KSDR is recommended for air drying, automatic oiling, life testing, chemical metering, and automatic duty cycling. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is within +/- 5% of the target delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for input voltages of 24, 120 or 230 volts AC. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Adjustable 0.1 s - 1000 m in 6 Ranges
  • +/-0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • 24, 120, or 230 V AC
  • 1 A Solid State Output
  • Encapsulated
Recycling (Flasher)
THD3 Digi-Power
Power Timing Module
 
The THD Series combines accurate timing circuitry with high power solid state switching. It can switch motors, lamps, and heaters directly without a contactor. The THD3 has equal ON and OFF time delays. A single RT sets both time delays. You can reduce labor, component cost, and increase reliability with these small, easy-to-use, Digi-Power timers.
  • High Load Currents up to 20 A, 200 A Inrush
  • Fixed or Adjustable Delays From 0.1 s - 1000 m
  • +/-0.5% Repeat Accuracy
  • +/- 1% Factory Calibration
  • 24, 120, or 230 V AC
  • Metallized Mounting Surface for Efficient Heat Transfer
  • Totally Solid State and Encapsulated
Recycling (Flasher)
TSD3 Digi-Timer
Timing Module
 
The TSD3 is a solid state ON/OFF recycling timer with the ON time always equal to the OFF time. When time delay is changed by the RT, both the ON and the OFF periods are changed. The TSD Series is designed for more demanding commercial and industrial applications where small size, and accurate performance is required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable Delays From 0.1 s - 100 h
  • Equal ON and OFF Delays
  • +/-0.1% Repeat Accuracy
  • +/- 1% Factory Calibration
  • 24, 120, or 230 V AC
  • 1A Solid State Output
  • Encapsulated
Recycling (Flasher)
KSD3 Digi-Timer
Timing Module
 
The KSD3 Digi-Timer is a cost effective approach for ON/OFF recycling applications. The ON time is equal to the OFF time. An adjustment of the RT will change the time delays of both ON and OFF times. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1 A steady and 10 A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
  • Fixed or Adjustable Delays from 0.1 s - 1000 m
  • Equal ON and OFF Delays
  • +/-0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • 12 - 120 V in 4 Ranges
  • 1A Solid State Output
  • Encapsulated
Percentage Timing
PTHF Series
Power Timing Module
 
The PTHF Series can be used for a variety of applications from chemical metering, to temperature regulating, to energy management. The infinite adjustability from 1 to 99% provides accurate percentage ON control over a wide factory fixed cycle period. When mounted on a metal surface, it can be used to drive solenoids, contactors, relays, or lamps, up to 20 Amps steady, 200 Amps inrush. PTHF is the suggested replacement for the PT Series.
  • ON/OFF Recycling Percentage Control
  • Controls Loads up to 20 A, 200 A Inrush
  • Fixed Cycle Period 10 s - 1000 m
  • +/-0.5% Repeat Accuracy
  • +/- 5% Factory Calibration
  • Totally Solid State & Encapsulated
  • Onboard or External Adjustment 1 to 99 % ON
Sequencer (Recycling)
SQ Series
Timing Module
 
The SQ Series is available with either 3 (SQ3) or 4 (SQ4) outputs and an adjustable or fixed time delay. The time delay period is the same for each output. This makes the SQ ideal for applications like dust collection, automatic lubrication, air drying, lighting displays, merchandising displays, duty cycling, and energy management.
  • Three or Four Outputs
  • Variable Delays From 0.1 s - 100 m in 5 Ranges
  • Totally Solid State for Long, Reliable Life
  • Encapsulated to Protect Against the Environment
  • Digital Circuitry for Accuracy and Stability
  • 1A Solid State Outputs

 

Sort By:
1
Macromatic TR-53122-05
Macromatic TR-53122-05
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-07
Macromatic TR-53122-07
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-08
Macromatic TR-53122-08
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-09
Macromatic TR-53122-09
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-10
Macromatic TR-53122-10
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-12
Macromatic TR-53122-12
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-15
Macromatic TR-53122-15
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53122-22
Macromatic TR-53122-22
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53128-05
Macromatic TR-53128-05
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53128-08
Macromatic TR-53128-08
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Macromatic TR-53128-10
Macromatic TR-53128-10
Price: $149.69 TXMAS Eligible

REPEAT CYCLE TIME RELAY more info
Sprecher + Schuh RZ7-FSH3UU23
Sprecher + Schuh RZ7-FSH3UU23
Price: $133.82

Timing Relay more info
Sprecher + Schuh RZ7-FSH3UZ12
Sprecher + Schuh RZ7-FSH3UZ12
Price: $133.82

TIMER PAUSE/PULSE 0.05S-60H more info
Sprecher + Schuh RZ7-FSH3VU23
Sprecher + Schuh RZ7-FSH3VU23
Price: $133.82

Timing Relay more info
Sprecher + Schuh RZ7-FSH3VZ12
Sprecher + Schuh RZ7-FSH3VZ12
Price: $133.82

TIMER PAUSE/PULSE 2X0.05S-60H more info
   
 
1