TRIPLEXOR
ATP Series
Macromatic ATP Series Triplexors are used in three load applications requiring
both the optimization of load usage by equalizing the run time of multiple loads and
additional capacity in case of excess load requirements.
As standard, these products operate as a normal Triplexor
with three inputs. An optional version with an 8-position rotary
switch is offered. This allows the unit to operate as either a:
(a) standard Triplexor
(b) Triplexor locking Load 1, 2 or 3 as the fi rst to be energized (Lead Load)
(c) standard Duplexor until system expansion requires control for a third Load
(d) Duplexor locking Load 1 or 2 as the fi rst to be energized (Lead Load).
All versions offer an indication of a switch failure (out-ofsequence)
- LEDs will fl ash if any switch closes out of sequence. Also, if power
is lost and returns with more than just the LEAD Switch closed, there is a fi xed 10
second delay between energization of the fi rst output and subsequent outputs to
prevent all Loads from coming on at the same time.
|
